Production Characteristics and Procedure Adjustment of Nail
Nowadays, the use of nail arrangement equipment is very common in packaging industry, because it can not only improve the quality of packaging and packaging speed, but also save them labor costs.
The nail arrangement equipment uses high pressure hydraulic oil, low noise and low failure rate. The circuit uses PLC integrated control, unlimited product limit and exquisite production.
1. High-pressure hydraulic oil, low noise and low failure rate are used in the nail arrangement equipment. PLC integrated control is used in the circuit. The product has unlimited limit and exquisite production.
2. Supporting the expansion of transport equipment, automatic nail selection, high automation equipment, reduce the selection of nail workers, reduce production costs.
3. The main components are used in Taiwan and Japan.
4. Reduce material and forming control, easy to adjust, nail forming and nail row infinite length adjustment, just adjust the length of various types of nails and feeding length to cut the die pad.
The adjusting program of row screw equipment closes and loosens the bolts to adjust the length. After adjusting, the bolts are locked and closed. The photovoltaic cells are fed as feedforward stop lights, and the taillights are not fed off the feeder.
1. Pressure adjustment: pneumatic pressure is adjusted to 5.56 kg.
2. Feeder adjustment: loosen the tightening bolt, adjust the length of the bolt, adjust the tightening locking bolt, feed the photovoltaic battery as feedforward stop lamp, tail lamp does not feed down.
3. Adjustment of Cylinder of Nail Rolling Equipment
(1) In the rear position of the cylinder, only to observe whether the material enters the 5 mm-10 mm part of the ejector groove of the mould, it must be adjusted to the range.
(2) Material fixed cylinder head needle position adjustment optical adjustment, adjustment feedback only two photoelectric end, when the cylinder is in place before and after the stop, slowly photovoltaic photo cell photoelectric switch after the end just ignited the eye fixed.
(3) The cylinder return eye is the end return position lamp. The electric eye of the cylinder of the cylinder is the end of the carrying lamp.